Company:Shandong Winsense Machinery Co., Ltd
Address:Korea Industrial Park,Fushan District,Yantai City, Shandong Province
Hydraulic Breaker Hose Related Information
At present, the method of replacing the inner sleeve of the excavator breaker is usually taken out by the tapping or welding torch gas cutting method, and the inner sleeve is taken out from the inner sleeve mounting hole of the cylinder body, but the inner sleeve is fitted with the inner sleeve mounting hole when the inner sleeve is installed. Very tight, and the inner sleeve of the inner sleeve mounting hole is positioned on the annular boss, so it cannot be pulled out by the hydraulic pulling device, and it is impossible to directly take him from the inner sleeve mounting hole by tapping. Therefore, we usually remove the cylinder from the frame of the breaker first, and then cut the inner sleeve into several pieces with a welding torch, and then it can be easily taken out.
Hydraulic Breaker Hose Content
When the hammer is working, it usually receives a strong impact load and acts on the steel brazing of the breaker, and then acts on the inner sleeve of the breaker. During the work, the steel braze will continue to be in the inner sleeve. The inner wall and the rear step are rubbed and constantly exert an impact load on them, so the inner wall and the rear step are easily worn or damaged.